Laboratory sink units built for wet work
Our laboratory sink units combine a cast epoxy resin sink with the same welded steel frame and Trespa worktop used across our benching range. Epoxy resin is used rather than stainless steel because it stands up to acids, solvents and other reagents that would attack metal over time.
The sink measures 450mm x 365mm x 200mm deep and is supplied with waste. Drainage grooves are machined directly into the Trespa worktop alongside the bowl, so glassware and equipment can drain straight into the sink rather than pooling on the surface.
Bought direct from the manufacturer
We build our laboratory sink units in our own UK workshop, so there is no reseller markup between us and your lab. It also means we can position the sink where you need it within the run rather than only where a catalogue allows.
Trespa TopLab Base worktop as standard
The worktop is 16mm Trespa TopLab Base, resistant to chemical spills, scratching and abrasion, and rated from -40°C to +180°C. All edges are chamfered and polished.
Standard sizes or bespoke to your drawing
Sink units are available from 1000mm through to 2000mm wide. Because each unit is made to order, we can alter the size, the sink position within the worktop, or build a sink unit to match an existing bench run. Send us your dimensions or a drawing and we will quote directly.
Need something different? See our standard lab benches to make up the rest of a run, our benches with shelving, or get in touch for a bespoke laboratory sink unit.
Sample Drawing
Below is a sample laboratory sink unit drawing with dimensions as a guide. When an order is placed we send out a drawing for approval to confirm all sizes are as required.
Loading Viewer...
